Angiography devices used in the diagnosis and treatment of cardiovascular diseases are advanced systems that offer high-resolution imaging and precise intervention. However, in order for these devices to operate safely and uninterruptedly, diagnostic tests should be applied at certain intervals and professional service services should be obtained. In this article, we will examine in detail the test and service processes applied to the angiography device.
As Anod company, we provide technical service and testing services to healthcare institutions operating in Ankara within the scope of both preventive maintenance and fault intervention in angiography systems. Thanks to these services, the accuracy, speed and safety performance of the devices are maintained at a high level.
What is Diagnostic Testing?
Diagnostic testing is the measurement and evaluation of all technical parameters that affect the operation of the device. Thanks to these tests, possible faults can be detected in advance and the diagnostic accuracy of the system is controlled.
The main diagnostic tests performed on angiography devices are as follows:
Image resolution and clarity test
X-ray tube performance test
Catheter movement sensitivity control
C-arm (moving arm) angle sensitivity measurement
Radiation dose and filtering level test
Data synchronization of image recording systems
Periodic performance of these tests prevents the device from causing problems in clinical use and increases the safety of the procedures to be applied to the patient.
Scope of Service
Anod technical service unit offers a wide range of services covering the following processes in angiography devices:
Fault Detection and Intervention
Analysis of hardware and software errors
Control of sensors, modules and connection points
Solution of instant imaging problems
Calibration and Performance Optimization
Compatibility of modules such as RFPA, MSUP, MPS with the system is tested
Image quality and data transfer are calibrated according to standards
Spare Part Supply and Replacement
X-RAY SPARE PARTS are supplied
Faulty parts are replaced with original products
The system is retested after part replacement
Security and Radiation Control
Radiation leakage test
Beam area homogeneity and control of safety barriers
Service Planning and Periodic Maintenance
Since angiography devices are systems open to intensive and sensitive use, they should undergo detailed technical service and tests at least once a year. In addition, if the device is used intensively, this process can be reduced to once every six months.
Thanks to service planning;
Sudden failures are prevented
Imaging quality is maintained
Patient safety is increased
Hardware life is extended
As Anod, we provide detailed reporting in every maintenance process and systematically plan the next service date.
Conclusion
The healthy operation of high-tech systems such as angiography devices is possible with regular diagnostic tests and expert technical service support. As Anod, we provide reliable and professional service at all stages so that your devices work with maximum efficiency in clinical conditions.