Angiography devices have an important place in the diagnosis and treatment processes for cardiovascular health. However, from time to time, various technical problems can occur in these devices. Such problems can reduce the performance of the device and disrupt the workflow. Angiography device troubleshooting steps ensure that the device is restored to working order in a short time. As Anod, we offer expert technical support and spare part solutions for troubleshooting problems in angiography devices.
The Most Common Problems and Solutions in Angiography Devices
Image Quality Problems:
Symptom: The image may be blurry, low contrast or noisy.
Solution: Detectors and sensors should be checked and recalibrated if necessary. In addition, the condition of the X-ray tube should be reviewed and replaced if necessary.
Device Not Turning On or Not Capturing:
Symptom: The device does not turn on or does not respond to the shooting command.
Solution: Power supplies, cable connections and fuses should be checked. Power regulators may be required for problems that may occur due to voltage fluctuations.
Error Codes Appear:
Symptom: Error codes or warnings are displayed on the device screen.
Solution: The source of the problem should be determined by reviewing the error code guide. Most of the time, these codes provide information about a specific component of the device. If necessary, the relevant part may need to be replaced or repaired.
Cooling and Heating Problems:
Symptom: Overheating of the device can cause performance degradation and malfunctions.
Solution: Cooling fans and filters should be checked, cleaned or replaced with new ones. It should be ensured that the heat sensors are working properly.
Data Transmission Problems:
Symptom: The images taken by the device cannot be transferred to the data management system or are transferred with a delay.
Solution: Data connections and network settings should be checked, and if necessary, the device software should be updated. In addition, it should be ensured that the device is properly integrated with PACS or HIS systems.
Steps to be Followed in the Troubleshooting Process
Determining the Source of the Problem:
Take note of the error codes seen on the device screen and check their equivalents in the guide.
Review the latest changes to understand which process caused the device to fail.
Regular Maintenance and Cleaning Procedures:
To prevent errors, the device's fans, filters and detectors should be cleaned and maintained regularly.
Anod ensures the trouble-free operation of angiography devices with regular maintenance services.
Spare Part Replacement:
Damaged or worn parts should be replaced with new ones in a timely manner.
Anod supports the device's long-term performance by offering high-quality spare parts.
Calibration and Software Updates:
The device's calibration should be done regularly and updated in accordance with manufacturer standards.
Updated software can prevent errors from recurring.
Expert Technical Support:
When problems cannot be solved, professional support can be received from Anod's technical service team.
The expert team ensures that the problem is resolved quickly and correctly, and makes the device operational again without interrupting the workflow.
Reliable Troubleshooting Solutions with Anod
Anod ensures that your devices work quickly and smoothly with expert technical service in the troubleshooting processes of angiography devices. We offer the best solutions for angiography devices, as well as other imaging devices such as X-ray tubes, X-ray spare parts, computerized tomography, mammography, and MR coils.
You can benefit from the professional technical support services offered by Anod to ensure the reliable operation of your angiography devices.