Computerized tomography devices, which play a major role in early diagnosis of diseases and direction of the treatment process, are advanced systems that can perform high-accuracy imaging. However, in order for these devices to operate reliably and for a long life, periodic technical checks must be performed at regular intervals. Thanks to these checks, the performance of the device is maintained, possible malfunctions are prevented and patient safety is ensured.
Computerized tomography systems consist of complex components. The x-ray tubes, detectors, software and mechanical parts in them may wear out or lose sensitivity over time. For this reason, technical checks performed at certain periods are of critical importance in terms of evaluating the performance of these components and intervening when necessary.
The first step of periodic technical checks is testing the image quality. The values of the device, such as resolution, contrast and homogeneity, are measured with the help of special phantoms. The data obtained as a result of these tests indicate whether the system is suitable for diagnostic use. If imaging defects are detected in the device, x-ray spare part replacement or calibration procedures may be required.
Computerized tomography systems are often integrated with MRI devices, tomography, X-ray or open MRI machines. In order to ensure data compatibility between these systems, it is important to check each device simultaneously. Especially in systems operating with X-ray energy, dosimeter measurements and radiation leakage tests are indispensable parts of technical controls.
Periodic technical controls are mandatory not only for fault prevention but also for compliance with regulations. The Ministry of Health and relevant authorities require regular checks of such devices. During this process, receiving expert technical service support also ensures that the device's documents and reports are prepared completely.
As Anod, we offer comprehensive periodic technical control services for your computerized tomography devices. Our expert technicians perform detailed analyses of your device and detect any performance deterioration or potential failure risks. At the end of each control, a technical report is presented and the current status of the device is documented.
Anod is a strong technical service partner that ensures that devices are operated in accordance with legislation, not only for maintenance and repair. In order to extend the life of your device and ensure the quality of service provided to patients, periodic checks should not be neglected.