Tomography devices, which are among the leading advanced imaging technologies, play a major role in diagnosing diseases by imaging the internal structure of the body in a layered and detailed manner. However, in order for these devices to operate at full performance, they must undergo diagnostic calibration processes at certain intervals and receive professional technical service support.
As Anod, we offer special testing, calibration and maintenance services for every brand and model of tomography systems. One of the most critical factors that determine image quality, especially in computerized tomography devices, is that the system is calibrated completely and correctly.
Diagnostic Calibration Process
The calibration process is performed to increase the imaging accuracy and signal reliability of the device. During this process, the X-ray tube, detectors, sensors and software modules of the device are tested and brought into compliance with the original manufacturer settings.
The following parameters are evaluated during the calibration process:
X-ray beam intensity and angle
Image resolution and clarity
Detector accuracy rate
System response time
Software synchronization
Special simulation tools and digital test phantoms are used for these processes. Problems that may occur in uncalibrated tomography devices include blurry images, incorrect measurements and incomplete tissue analyses. Such errors may lead to incorrect diagnosis and treatment.
Technical Service Services
In addition to calibration, it is also mandatory to take tomography devices to regular technical service. The technical service services we offer as Anod include checking the hardware parts of the device, replacing worn parts and software updates.
Frequently encountered failures include:
X-ray tube failures
Mechanical failures in the gantry system
Inadequacy in the cooling system
Sensor connection breaks
Software and imaging errors
All these failures, as can be seen in systems such as MRI devices, X-ray and open MRI machines, can cause greater damage, especially in tomography devices, if not detected early.
The spare parts we use during the service are completely original and device-compatible products. Thus, the performance of the device is guaranteed and uninterrupted use is ensured. In addition, quality control tests performed after the service ensure that the device is operating at full capacity again.
Periodic Control and Service Planning
It is recommended that tomography devices be periodically serviced at least once a year. Thanks to these procedures, the life of the device is extended, while the imaging quality offered to patients is also maximized.
As Anod, we ensure that the devices operate safely and smoothly with not only troubleshooting but also preventive maintenance services in these service procedures.
As a result, diagnostic calibration and technical service processes of tomography systems are of critical importance for the correct operation of the device and the quality of healthcare services. With our expertise in this field, as Anod, we always offer professional and fast solutions.